Vision Components From One Source | Saber1 Technologies LLC

HOME > ABOUT US > CAREERS > CONTACT US
	Saber 1 Technologies LLC All Your Vision Components From One Source - Cutting Edge Products and Service Phone (978) 244-0490 / Fax (978) 244-0491
CABLES ANALOG VIDEO BIT MAXX CAMERA CASE CAMERA LINK COAXPRESS FIREWIRE GIGABIT ETHERNET INTERNAL CAMERA LINK POWER SUPPLIES SPECIALITY UEYE CAMERAS BASLER CIS AMERICAS HITACHI USA IMPERX IO INDUSTRIES NET USA PHOTON FOCUS SMARTEK XIMEA SOFTWARE COAX CHIPS EQCOLOGIC DVR SYSTEMS CUSTOM SYSTEMS DVR SYSTEMS SOFTWARE FILTERS & LENSES FUJINON GOYO MIDOPT ZEISS FRAME GRABBERS ADLINK BIT FLOW IMPERX SOFTWARE LIGHTING METAPHASE MONITORS TRU-VU SIGNAL CONVERTERS ECQOLOGIC IMPERX SENSOR TO IMAGE VIVID ENGINEERING SOFTWARE

Vivid Engineering

MODEL	FEATURES	DETAILS	DOWNLOADS
CLR-101B Camera Link Repeater	Doubles max distance between camera and frame grabber Uses standard Camera Link cables (not included) Supports Camera Link base configuration High-speed 85 MHz interface chipset, works with any base camera Several repeaters may be cascaded for greater distances Flow-through connector placement Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply with locking connector included 3-year warrantee	The CLR-101B Camera Link Repeater is a cost-effective approach to increasing separation between camera and fame grabber. One Camera Link cable connects the camera to the repeater, and a second cable connects the repeater to the frame grabber. This solution provides a 20 meter reach between camera and frame grabber using a pair of standard 10m Camera Link cables. Several repeaters and cables may be cascaded to support greater distances. CLR-101B incorporates high-speed 85MHz interfaces and is compatible with any Camera Link ”Base” configuration camera. The CLR-101B is housed in sturdy, compact aluminum enclosures and is well suited for industrial environments.	CLR-101B Data Sheet (PDF) CLR-101B User's Manual (PDF)
CLR-102 Camera Link PoCL Repeater/Adapter	Doubles max distance between PoCL camera and frame grabber Enables use of PoCL cameras with either PoCL or standard (non-PoCL) frame grabbers Incoporates SafePower feature Miniature Camera Link (miniCL) connectors Supports Camera Link base configuration High-speed 85 MHz interface chipset Several repeaters may be cascaded for greater distances Also works with standard (non-PoCL) cameras Front-panel power and link status indicators Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply with locking connector included 3-year warrantee	The CLR-102 is a cost-effective approach to increasing separation between camera and fame grabber in PoCL (Power over Camera Link) applications. One Camera Link cable connects the camera to the repeater, and a second cable connects the repeater to the frame grabber. This solution provides a 20 meter reach between camera and frame grabber using a pair of 10m PoCL Camera Link cables. Several repeaters and cables may be cascaded to support greater distances. The CLR-102 is also an adapter, enabling the use of PoCL cameras with either PoCL or standard (non-PoCL) Camera Link frame grabbers. The CLR-102 incorporates the PoCL SafePower feature. CLR-102 incorporates high-speed 85MHz interfaces and is compatible with both PoCL and standard (non-PoCL) ”Base” configuration cameras. The CLR-102 is housed in a sturdy, compact aluminum enclosure.
CLR-111A Camera Link Repeater	Doubles max distance between camera and frame grabber Uses standard Camera Link cables (not included) Supports all Camera Link configurations (base, medium, full) High-speed 85 MHz interface chipset, works with any camera 80-bit extended mode compatible Front-panel link status indicators Several repeaters may be cascaded for greater distances Flow-through connector placement Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply included 3-year warrantee	The CLR-111A Camera Link Repeater is an economical approach for increasing separation between camera and fame grabber. One Camera Link cable pair connects the camera to the repeater, and a second cable pair connects the repeater to the frame grabber. This arrangement provides a 20 meter reach between camera and frame grabber using standard 10m Camera Link cables. Several repeaters and cable sets may be cascaded to support greater distances. The CLR-111A supports all Camera Link configurations (base, medium, full) with pixel clock rates up-to 85 MHz. The CLR-111A also supports 80-bit extended-mode applications. Front-panel status LEDs identify an active base, medium, or full configuration connection. The CLR-111A Camera Link Repeater is housed in a sturdy, compact aluminum enclosure and is well suited for industrial environments.	CLR-111A Data Sheet (PDF) CLR-111A User's Manual (PDF)
CLV-401 Camera Link Video Splitter	Interfaces one camera to two frame grabbers Second frame grabber can be used for camera setup, processing, monitoring, etc Uses standard CameraLink cables (not included) Supports CameraLink “base” configuration Also acts as a repeater, doubling max distance between camera and frame grabber Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply included 3-year warrantee	The CLV-401 Camera Link Video Splitter interfaces one Camera Link camera to two frame grabbers using standard Camera Link cables. This enables the use of a second frame grabber for applications requiring parallel or distributed processing, monitoring, etc. One frame grabber acts as master and provides control and communications to the camera. The second frame grabber receives camera video data only. The CLV-401 supports the Camera Link base configuration. The CLV-401 also acts as a repeater, doubling the maximum distance between camera and frame grabber. Housed in a sturdy, compact aluminum enclosure, the CLV-401 Camera Link Video Splitter is and is well suited for industrial environments	CLV-401 Brochure (PDF) CLV-401 User's Manual (PDF
CLV-402 Camera Link Video Splitter	Interfaces one camera to two frame grabbers Second frame grabber can be used for camera setup, processing, monitoring, etc Uses standard Camera Link cables (not included) Supports all Camera Link configurations (base, medium, full) 80-bit extended mode compatible High-speed 85 MHz interface chipset Also acts as a high-speed (85 MHz) repeater, doubling max distance between camera and frame grabber May be cascaded to support 4 or 8 frame grabbers Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply included 3-year warrantee	The CLV-402 Camera Link Video Splitter interfaces one Camera Link camera to two frame grabbers using standard Camera Link cables. This enables the use of a second frame grabber for applications requiring parallel or distributed processing, monitoring, etc. One frame grabber acts as master and provides control and communications to the camera. The second frame grabber receives camera video data only. The CLV-402 incorporates high-speed 85 MHz interfaces and supports all Camera Link configurations (base, medium, full) including 80-bit extended mode. Multiple CLV-402s may be cascaded to support 4 or 8 frame grabbers. The CLV-402 also acts as a high-speed (85 MHz) repeater, doubling the maximum distance between camera and frame grabber. Housed in a sturdy compact aluminum enclosure, the CLV-402 Camera Link Video Splitter is well suited for industrial environments.	CLV-402 Data Sheet (PDF) CLV-402 User's Manual (PDF)
CLV-403 Camera Link Video Splitter	Two independent splitters in a single unit for multi-camera systems Supports secondary frame grabbers for parallel processing, monitoring, etc Uses standard Camera Link cables (not included) Supports Camera Link Base configuration High-speed 85 MHz interface chipset Also acts as a repeater, doubling max distance between camera and frame grabber Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply included 3-year warrantee	Designed for multi-camera systems, the CLV-403 Camera Link Video Splitter interfaces two Camera Link cameras to two frame grabbers each using standard Camera Link cables. This enables the use of secondary frame grabbers for applications requiring parallel or distributed processing, monitoring, etc. One frame grabber acts as master and provides control and communications to the camera. The second frame grabber receives camera video data only. The CLV-403 incorporates high-speed 85 MHz interfaces and supports Camera Link base configuration cameras. The CLV-403 also acts as a repeater, doubling the maximum distance between the cameras and the frame grabbers. Housed in a sturdy, compact aluminum enclosure, the CLV-403 Camera Link Video Splitter is well suited for industrial environments.	CLV-403 Data Sheet (PDF) CLV-403 User's Manual (PDF)
CLV-411 Camera Link Video Splitter	Interfaces one camera to up-to four frame grabbers Supports parallel or distributed processing, camera sharing, etc Uses standard Camera Link cables (not included) Supports Camera Link Base configuration Medium configuration support using two CLV-411s May be cascaded for large parallel processing systems High-speed 85 MHz interface chipset Dynamic master frame grabber selection via opto-isolated control inputs Front panel LEDs identify master frame grabber Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply included 3-year warrantee	The CLV-411 Camera Link Video Splitter interfaces one Camera Link camera to up-to four frame grabbers using standard Camera Link cables. This enables the use of multiple frame grabbers for applications requiring parallel or distributed processing, camera sharing, etc. One frame grabber acts as master and provides control and communications to the camera. The remaining frame grabbers receive camera video data only. The master frame grabber is selectable and may be dynamically changed for applications requiring camera control sharing. The CLV-411 incorporates high-speed 85 MHz interfaces and supports the Camera Link base configuration. Medium configuration applications are supported using two CLV-411s. Multiple CLV-411s may be cascaded for large parallel processing systems. The CLV-411 Camera Link Video Splitter is housed in a sturdy, compact aluminum enclosure.	CLV-411 Data Sheet (PDF) CLV-411 User's Manual (PDF)
CLV-412 Camera Link Video Splitter	Interfaces one camera to up-to four frame grabbers All-configuration support (base, medium, full) Supports parallel or distributed processing, camera sharing, etc Uses standard Camera Link cables (not included) Supports 80-bit modes May be cascaded for large parallel processing systems High-speed 85 MHz interface chipset, supports any Camera Link Camera Dynamic master frame grabber selection via opto-isolated control inputs Rear-panel LEDs identify master frame grabber Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply included 3-year warrantee	The CLV-412 all-configuration (base, medium, full) Camera Link Video Splitter interfaces one Camera Link camera to up-to four frame grabbers using standard Camera Link cables. This enables the use of multiple frame grabbers for applications requiring parallel or distributed processing, camera sharing, etc. One frame grabber acts as master and provides control and communications to the camera. The remaining frame grabbers receive camera video data only. The master frame grabber is selectable and may be dynamically changed for applications requiring camera control sharing. The CLV-412 incorporates high-speed 85 MHz interfaces and supports all Camera Link cameras. Multiple CLV-412s may be cascaded for large parallel processing systems. The CLV-412 Camera Link Video Splitter is housed in a sturdy, compact aluminum enclosure.
CLM-601 Camera Link Multiplexer	Interfaces up-to four cameras to one frame grabber High-speed (85 MHz) design supports all base configuration cameras Multiple camera selection methods: Camera Link interface serial messages Camera Link interface Camera Control (CC) signals Standard RS-232 port Fixed selection via switch settings Passes all interface signals (video data, serial comm, camera control) May be cascaded to support greater than four cameras Medium configuration support using two CLM-601s LED camera select indicators Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply and RS-232 cable included 3-year warrantee	The CLM-601 Camera Link Multiplexer interfaces up-to four base configuration Camera Link cameras to one frame grabber using standard Camera Link cables. This capability supports applications requiring the ability to select between multiple cameras. The CLM-601 incorporates high-speed (85 MHz) interfaces and works with any base camera. The CLM-601 provides multiple camera selection methods including rear-panel switch settings, Camera Link interface signals (serial or camera control), and an external RS-232 port. Medium configuration cameras are supported using two CLM-601s in parallel. Multiple CLM-601s may be cascaded to support more than four cameras. The CLM-601 Camera Link Multiplexer is housed in a sturdy, compact aluminum enclosure and is well suited for industrial and OEM applications	CLM-601 Data Sheet (PDF) CLM-601 User's Manual (PDF)
CLM-611 Camera Link Multiplexer	Interfaces up-to four cameras to one frame grabber Supports all Camera Link configurations (base, medium, full) High-speed (85 MHz) design supports all Camera Link cameras Supports 80-bit modes Multiple camera selection methods: Camera Link interface serial messages Camera Link interface Camera Control (CC) signals Standard RS-232 port Standard USB port (w/ optional adapter) Fixed selection via switch settings Passes all interface signals (video data, serial comm, camera control) May be cascaded to support greater than four cameras LED camera select indicators Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply and RS-232 cable included 3-year warrantee	The CLM-611 Camera Link Multiplexer interfaces up-to four Camera Link cameras of any configuration (base, medium, full) to one frame grabber using standard Camera Link cables. This capability supports applications requiring the ability to select between multiple cameras. The CLM-611 incorporates high-speed (85 MHz) interfaces and works with any Camera Link camera. The CLM-611 provides multiple camera selection methods including rear-panel switch settings, Camera Link interface signals (serial or camera control), and an external RS-232 port. An inexpensive optional adapter supports control of the CLM-611 via a PC USB port. Multiple CLM-611s may be cascaded to support more than four cameras. The CLM-611 Camera Link Multiplexer is housed in a sturdy, compact aluminum enclosure.
CLT-301R/L/M Camera Link Translators	Enable use of RS-422 and LVDS cameras with CameraLink frame grabbers Interfaces to a wide range of single-channel, dual-channel, and color cameras AIA standard 68-pin camera interface to maximize reuse of existing/standard cables “R” version supports RS-422 cameras “L” version supports LVDS cameras “M” version supports mixed RS-422 / LVDS cameras (i.e. Megaplus) 66 MHz max pixel clock rate for “L” and “M” versions 32 MHz max pixel clock rate for “R” version Rear-panel dipswitch mode selection Supports cameras w/ pixel clock frequencies as low as 10 MHz (2.5 MHz version available) Selectable camera clock and timing signal polarities Sturdy, compact aluminum enclosure External power supply included FCC compliant (Class A) 3-year warrantee	The CLT-301R, CLT-301L, and CLT-301M Camera Link Translators enable the use of traditional RS-422 and LVDS digital cameras with Camera Link frame grabbers. The “R” and “L” versions support parallel RS-422 and LVDS digital camera data, respectively. The “M” version supports the mixed RS-422 / LVDS interface found in some Megaplus cameras. The CLT-301’s incorporate the AIA standard 68-pin camera interface to maximize reuse of existing and standard camera cables. The CLT-301’s are extremely flexible and can translate a wide range of single-channel, dual-channel, and color cameras from parallel digital format to Camera Link TM using rear-panel mode switch settings. The CLT-301R/L/M Camera Link TM Translators are housed in a sturdy, compact aluminum enclosure and are well suited for industrial environments.	CLT-301R/L/M Data Sheet (PDF) CLT-301R/L/M User's Manual (PDF)
CLT-302R/L Camera Link Translators	Enable use of RS-422 and LVDS cameras with Camera Link frame grabbers 100-pin connector is compatible with National Instruments PCI-1422 and PCI-1424 frame grabbers for use with existing/standard camera cables Camera Link “base” configuration interface, supports up-to 24-bit data • “R” version supports RS-422 cameras “L” version supports LVDS cameras 2.5 MHz to 85 MHz camera pixel clock range for “L” version 2.5 MHz to 32 MHz camera pixel clock range for “R” version Selectable camera clock and timing signal polarities RS-232 camera communication support Front-panel link status indicator Minimal data pass-through latency Flow-through connector placement Sturdy, compact aluminum enclosure with mounting flange Multi-nation power supply included, locking connector optional 3-year warrantee	The CLT-302R and CLT-302L Camera Link Translators enable the use of traditional RS-422 and LVDS digital cameras with Camera Link frame grabbers. The “R” and “L” versions support parallel RS-422 and LVDS digital camera data, respectively. The CLT-302’s are extremely flexible and can translate a wide range of cameras from parallel digital format to Camera Link base configuration with up-to 24-bit data. Cameras with pixel clock rates as low as 2.5 MHz and as high as 85 MHz are supported. RS-232 camera communication is also supported. A front-panel link status indicator identifies an active connection. The CLT-302’s are housed in sturdy, compact aluminum enclosure. A locking power supply connector is optional.	CLT-302R/L Data Sheet (PDF)
CLT-351R/L Camera Link Translators	Enable use of CameraLink cameras with RS-422 and LVDS frame grabbers Interfaces to virtually any “base” configuration CameraLink camera AIA standard 68-pin frame grabber interface to maximize use of existing/standard cables “R” version supports RS-422 frame grabbers “L” version supports LVDS frame grabbers 66 MHz max pixel clock rate for “L” version 32 MHz max pixel clock rate for “R” version Rear-panel dipswitch mode selection Programmable frame grabber interface pixel clock phase Selectable frame grabber interface timing signal polarities Sturdy, compact aluminum enclosure External power supply included FCC, Canadian, European EMI compliant 3-year warrantee	The CLT-351R and CLT-351L Camera Link Translators enable the use of newer Camera Link cameras with frame grabbers incorporating traditional RS-422 and LVDS digital interfaces. The “R” and “L” versions support RS-422 and LVDS frame grabbers, respectively. The CLT-351’s incorporate an AIA standard 68-pin frame grabber interface to maximize the use of standard and existing cables. The CLT-351’s are extremely flexible and can translate “base” configuration Camera Link cameras to AIA-standard parallel digital format using rear-panel mode switch settings. The CLT-351R/L Camera Link Translators are housed in a sturdy, compact aluminum enclosure and are well suited for industrial environments.	CLT-351R/L User's Manual (PDF)
CLS-211 Camera Link Simulator	High-performance video test pattern generator Supports all CameraLink configurations (base/medium/full) 80-bit mode support; ten 8-bit taps, and eight 10-bit taps Fully programmable video timing; mimics camera characteristics Advanced chipset supports video clock rates up-to 85 MHz. Area and line scan formats, image sizes to 64Kx64K Box, line, horizontal/vertical/diagonal wedge test patterns Programmable video pattern initial values and step sizes “Roll” feature adds pattern motion Triggered (exsync) mode and integration timer Connects to host PC serial port (RS-232), or USB port w/ optional adapter Controlled via a simple Command Line Interface (CLI) Downloadable configuration files are easily created and modified w/ user settings Non-volatile save/recall of user settings Can operate stand-alone Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply and RS-232 cable included 3-year warrantee	The CLS-211 Camera Link Simulator is a high performance video test pattern generator supporting all Camera Link configurations (base, medium, full). Fully programmable video timing enables the CLS-211 to mimic the characteristics of cameras with video clock rates up-to 85 MHz. The CLS-211 is controlled using a PC with a standard RS-232 serial port. Alternatively, the CLS-211 can be connected to a PC USB port using an optional adapter. CLS-211 control is performed via a simple, straightforward, Command Line Interface (CLI). No special software is required. Configuration files are easily created with user parameters and downloaded to the CLS-211. The CLS-211 Camera Link Simulator is extremely useful for the development, test, and integration of Camera Link products and systems. The CLS-211 is housed in a sturdy aluminum enclosure. The CLS-211 has been upgraded and now supports the two 80-bit modes (ten 8-bit taps & eight 10-bit taps), as well as other enhancements. Existing CLS-211's with serial number M07155 and higher are upgradeable to the current configuration. Contact us for more information.	CLS-211 Data Sheet (PDF) CLS-211 User's Manual (PDF)
CLS-212 Camera Link Simulator	High-performance video test pattern generator All the features of our CLS-211 plus PoCL support Tests/exercises frame grabber PoCL SafePower functionality Uses miniature Camera Link (miniCL) connector common in PoCL devices Supports all CameraLink configurations (base/medium/full) 80-bit mode support; ten 8-bit taps, and eight 10-bit taps Fully programmable video timing; mimics camera characteristics Advanced chipset supports video clock rates up-to 85 MHz. Area and line scan formats, image sizes to 64Kx64K Box, line, horizontal/vertical/diagonal wedge test patterns Programmable video pattern initial values and step sizes “Roll” feature adds pattern motion Triggered (exsync) mode and integration timer Connects to host PC serial port (RS-232), or USB port w/ optional adapter Controlled via a simple Command Line Interface (CLI) Downloadable configuration files are easily created and modified w/ user settings Non-volatile save/recall of user settings Can operate stand-alone Sturdy, compact aluminum enclosure w/ mounting flange Universal power supply and RS-232 cable included 3-year warrantee	Based on our CLS-211 simulator, the CLS-212 Camera Link Simulator adds features for testing and exercising Power Over Camera Link (PoCL) interfaces. The CLS-212 is a high performance video test pattern generator supporting all Camera Link configurations (base, medium, full) plus 80-bit modes. Fully programmable video timing enables the CLS-212 to mimic the characteristics of cameras with video clock rates up-to 85 MHz. The CLS-212 incoporates the Miniature Camera Link (miniCL) connector widely used in PoCL applications. The CLS-212 is controlled using a PC with a standard RS-232 serial port. Alternatively, the CLS-212 can be connected to a PC USB port using an optional adapter. CLS-212 control is performed via a simple, straightforward, Command Line Interface (CLI). No special software is required. Configuration files are easily created with user parameters and downloaded to the CLS-212. The CLS-212 Camera Link Simulator is extremely useful for the development, test, and integration of Camera Link products and systems. The CLS-212 is particularly useful for testing PoCL cables and PoCL frame grabber SafePower functionality. The CLS-212 is housed in a sturdy aluminum enclosure.	CLS-212 User's Manual (PDF)
CLB-501 Camera Link Breakout Box	Provides access to all data (video, camera control, serial comm.) Standard 0.1” pitch dual-row header-style connector Removable header jumpers (shunts) enable external data sourcing Standard LVTTL signal levels Power, ground, and buffered clock pins aide interfacing Uses standard CameraLink cables (not included) Supports CameraLink “base” configurations “Medium” configuration support using two CLB-501s Also acts as a repeater, doubling max distance between camera and frame grabber Sturdy, compact aluminum enclosure w/ mounting flange International (US/Europe) power supply included 3-year warrantee	The CLB-501 Camera Link Breakout Box provides convenient access to the data transferred between camera and frame grabber over a Camera Link connection. All video, control, and communication data can be monitored and/or sourced via a connector located on the rear panel. The CLB-501 incorporates a standard dual-row, header-style connector for easy connection to external test equipment. The unit comes with a complete set of shorting blocks (shunts) installed on the header. The shunts may be removed to break the connection between camera and frame grabber in order to insert an external data source (i.e. for camera control, serial comm., etc.). The CLB-501 also supports a remapping of the video and control data between camera and frame grabber. The CLB-501 supports the Camera Link “base” configuration. “Medium” configuration applications are supported using two CLB-501s. The CLB-501 Camera Link Breakout Box is extremely useful during the development, test, and integration of Camera Link products and systems. Housed in a sturdy aluminum enclosure, the CLB-501 is well suited for industrial environments.	CLB-501 User's Manual (PDF)